Gira System 3000 lighting control

• Switching and dimming of light
• Manually with switches and using an app or automatically by
  motion detectors and timers
• Definition of automatic switch-on times
• Presence simulation
• Compatible with eNet products

• Switching times can be adjusted to the sunrise and sunset by the integrated astro function
• Custom adjustment of the brightness of the lighting
• Night light and hotel function
• Choice of different frame variants
• Easy start-up

• Manual control of light
• Storage of a custom switch-on brightness
• Timer: easy operation and programming
• Quick programming: storage of the current
  time as switching time
• Blocking function used to deactivate the auxiliary unit and
  automatic function

• Standard time program
• Automatic summer/winter time
• Ambient temperature: −5 to +45 °C
• Accuracy per month: ± 10 s
• Power reserve: approx. 4 h

• Manual control of light
• Storage of a custom switch-on brightness
• Timer: easy operation and programming
• Up to 40 custom time switching points
• Copying the programming to other timers
• Blocking function used to deactivate the auxiliary unit and
  automatic function

• Automatic summer/winter time
• Ambient temperature: −5 to +45 °C
• Accuracy per month: ± 10 s
• Power reserve: approx. 4 h

The reliable standard operating top unit for manual lighting control. This device can already store a custom
dimming level as an intermediate position.

• Manual control of light
• Storage of a custom switch-on brightness
• Ambient temperature: −5 to +45 °C

Two dimming and switching channels can be controlled separately at the same time with the 2-gang operating top unit in combination with two-channel flush-mounted inserts.

• Manual control of light
• Storage of a custom switch-on brightness
• Ambient temperature: −5 to +45 °C

The arrow symbols indicate the setting of the dimming levels. This device also allows a custom switch-on brightness to be stored.

• Manual control of light
• Storage of a custom switch-on brightness
• Ambient temperature: −5 to +45 °C

The Gira System 3000 operating top unit memory cannot only store a custom dimming level, but also a time setting for it. If memory mode is activated, this is repeated in a 24-hour cycle. In night mode the status and function LEDs are not permanently lit up - so sleep is not disturbed.

• Manual control of light
• Storage of a custom dimming level
• Storage of switch-on and switch-off time.
• Repetition in a 24-hour cycle upon activation
  of memory mode
• Blocking function used to deactivate the
  auxiliary unit operation and memory mode
• Night mode: status and function LEDs are not
  permanently lit up
• Ambient temperature: −5 to +45 °C

• Operation on light inserts
• Manual, wireless and time-controlled operation of lighting
• Storage of a switch-on and switch-off time. In memory mode, these switching times are repeated in a 24-hour cycle.
• The blocking function blocks auxiliary unit operation, wireless operation and deactivates memory mode

• Night mode that can be set. Status and function LEDs
  are not permanently lit up
• Status indication with LED
• In combination with the eNet server, it can be controlled also with a smartphone, tablet or voice control
• Fully encrypted wireless transmission (AES-CCM). Can be set with eNet server version 2.2 or higher (depending on the insert)
• Ambient temperature: −5 to +45 °C

• Automatic switching of lighting, depending on the thermal motion and ambient brightness
• Detection range of 180°
• Clip-on panel used to limit the detection range (only for 1.10 m)

• Extended detection range via auxiliary units
• The switch-on brightness and sensitivity can be set
• Mounting height of 1.10 m or 2.20 m
• Gira TX_44 also provides IP 44 splash protection

• Automatic switching of lighting, depending on the thermal motion and ambient brightness
• Detection range of 180°
• Clip-on panel used to limit the detection range (only for 1.10 m)
• Extended detection range via auxiliary units
• The switch-on brightness, delay time and sensitivity can be set
• Staircase function with switch-off pre-warning

• Optimised burglary prevention due to presence simulation and alarm function
• Night light and hotel function
• The basic brightness can be set
• Settings with smartphone and Gira System 3000 App
• Slide switch or push button for continuous on/off
• Mounting height of 2.20 or 1.10 metres
• Gira TX_44 also provides IP 44 splash protection

• Automatic switching of lighting, depending on the brightness and motion
• 360° detection range for mounting heights of up to six metres
• Three independent PIR sensors that can be set separately
• Clip-on panel used to limit the detection range
• Extension of the detection range by grouping up to ten devices
• Staircase function with switch-off pre-warning
• Optimised burglary prevention due to presence simulation and alarm function

• Continuous lighting control in combination with dimming inserts
• Can be used as a motion detector and presence detector
• Night light function
• The basic brightness can be set
• Settings with smartphone and Gira System 3000 App
• Typical mounting height of three metres:
• Detection field of tangential direction of movement: Ø 20 metres
• Detection field of radial direction of movement: Ø 12 meters

The relay switching insert switches different light sources, e.g. LEDs, halogen lamps or fluorescent lamps and motors. The TEST button with LED display can be used to conveniently set delay times if desired.

Product details:

• Auxiliary input for the two-wire or three-wire auxiliary insert and rocker button
• Time function / delay time that can be set with the TEST button:
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The 2-gang relay switching insert in combination with a 2-gang operating top unit can switch two independent outputs with different light sources, e.g. LEDs, halogen lamps, fluorescent lamps or motors. A time function can be activated for the second output. In combination with an operating top unit, both outputs are switched together. A switch-on delay of three minutes can be activated and a delay time can be set (e.g. for a light and fan in the bathroom) for the second output.

Product details:

• Auxiliary input for the two-wire or three-wire auxiliary insert
  and rocker button
• Time function / delay time that can be set with the TEST button:
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The electronic switching insert switches light bulbs,
HV halogen lamps, electronic or inductive transformers with halogen or LED lights as well as dimmable HV LED or compact fluorescent lamps. The electronic switching insert can be operated with or without a neutral conductor. The set operating mode is indicated by an LED.

Product details:

• Switch-on with bulb-saving soft start
• Auxiliary units can be connected
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The impulse insert can be used in combination with an operating top unit or motion detector to manually or automatically control the light in the staircase on a floor-by-floor basis. In combination with the DRA staircase light timers, existing staircase installations can be converted to an automatic lighting control without having to rewire.

Product details:

• For installation or retrofitting of motion detectors in the staircase
• Easy retrofitting of existing three-wire or four-wire installations
• Operation with the DRA staircase light timers
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The Standard universal LED rotary dimming insert is used to
switch and dim the lighting. It can be operated with
or without a neutral conductor.

Product details:

• Automatic setting of the operating mode suitable for the load
• Switch-on with bulb-saving soft start
• The minimum brightness can be set
• The switch-on brightness or last brightness level can be stored
• Electronic excess-temperature protection
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The lighting is switched and dimmed with the Komfort universal LED rotary dimming insert. It can be operated with or without a neutral conductor. The dimmer can be set conveniently with a dimming mode button with LED display.

Product details:

• Automatic or manual setting of the operating mode
  suitable for the load
• Switch-on with bulb-saving soft start
• The minimum brightness can be set
• The switch-on brightness or last brightness level can be stored
• Auxiliary input for the rotary auxiliary insert for LED dimmers,
  two-wire or three-wire auxiliary insert and
  rocker button
• Electronic excess-temperature protection
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

• Automatic or manual setting of the operating mode suitable for the load
• The minimum brightness can be set
• The switch-on brightness or last brightness level can be stored
• Auxiliary input for the two-wire or three-wire auxiliary insert
  and rocker button (Komfort only)

• Electronic excess-temperature protection
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The System 3000 Komfort 2-gang universal LED dimming insert allows two lightings to be switched and dimmed separately. It is suitable for the usual types of light sources incl. LED lights. Operation with other top units (motion detectors, timers etc.) from the System 3000 basically corresponds to operation with an operating top unit.

Product details:

• Automatic or manual setting of the operating mode suitable for the load
• The minimum brightness can be set
• The switch-on brightness or last brightness level can be stored
• Both channels can be dimmed separately via a three-wire auxiliary unit
• Auxiliary input for the two-wire or three-wire auxiliary insert and rocker button
• Electronic excess-temperature protection
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The Mini universal LED dimmer can be used
to switch and dim the lighting. It can be operated with or without
a neutral conductor and with a two-wire or three-wire auxiliary insert with operating top unit, rocker button or rotary auxiliary insert for LED dimmers.

Product details:

• Automatic or manual setting of the operating mode suitable for the load
• The set operating mode is indicated by an LED
• The switch-on brightness or last brightness level can be stored
• The minimum brightness can be set
• Electronic excess-temperature protection
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The DRA universal LED dimmer is used to switch and dim the lighting. An advantage is that no new lines have to be laid when renovating. It can be mounted directly onto the existing installation. The required components disappear centrally in a sub-distribution. The DRA dimmer is mounted in the sub-distribution on top-hat rails according to DIN EN 60715.

Product details:

• It is operated with a two-wire or three-wire auxiliary insert with an operating top unit, rocker button or rotary auxiliary insert for LED dimmers.
• Automatic or manual setting of the operating mode suitable for the load
• The set operating mode is indicated by an LED
• Switch-on with bulb-saving soft start
• The switch-on brightness or last brightness level can be stored
• The minimum brightness can be set
• Assembly in the sub-distribution on top-hat rails
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The DRA universal LED power booster is a modular extension for dimmers based on the power requirement. This allows even large LED loads to be conveniently switched and dimmed. The power booster is operated via the upstream dimmer.

Product details:

• Several DRA universal LED power boosters can be connected to a dimmer

• Can also be used with flush-mounted dimmers

• Connected loads are supplied by a common
  load line
• Electronic excess-temperature protection
• Assembly in the sub-distribution on top-hat rails
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The one-channel DALI Power control unit flush-mounted insert is used to control lights with a DALI interface and DALI ballasts with and without Tunable White function. It is operated with the Gira operating top units or timers or by motion and presence detectors.

Product details:

• Operation with mains voltage (active operation)
• The device delivers the necessary control current for 18 DALI devices (can be extended to 72) during active operation
• Switch-on with the last brightness / colour temperature set or a stored brightness / colour temperature.
• Colour temperature setting of 2,000 to 10,000 K
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The two-wire auxiliary unit insert is used to switch and dim the lighting. In total, the auxiliary unit always has exactly the same number of functions as the top unit positioned at the main unit. It is operated in combination with an operating top unit.

Product details:

• Can be combined only with an operating top unit with or without an arrow symbol
• Set-up of other operating points for the control of Gira System 3000
• Any number of two-wire auxiliary inserts can be connected to a main unit - total maximum line length of 100 metres
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

The three-wire auxiliary insert offers a wide range of
functions, depending on the top unit and insert
at the main unit. In total, the auxiliary unit always has exactly the same number of functions as the top unit positioned
at the main unit. It is operated with the top units from the Gira System 3000.

Product details:

• Can be combined with all top units
• Extension of the detection field of
  motion detectors

• Controls up to five main units in central function

• A maximum of ten three-wire auxiliary inserts can be connected to one or several main units; up to ten three-wire auxiliary inserts can be connected if the auxiliary unit and load lines are laid separately

• Maximum total line length of 100 m
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals

All System 3000 dimmers with an auxiliary input are controlled with the three-wire rotary auxiliary insert.

Product details:

• Operation identical to the universal LED rotary dimming insert
• A maximum of five rotary auxiliary inserts can be connected to one or more main units
• Maximum total line length of 100 m
• AC 230 V, 50/60 Hz
• VDE mark
• Screw terminals